What is Uninterrupted Power Supply?

The uninterrupted power supply classification
Generally speaking, uninterrupted power supply can be divided into three categories according to its different working methods: backup, online and on-line interactive. The backup uninterrupted power supply operation is simple: when the power is normal, electricity will be provided directly to the computer equipment; when the utility power is disconnected, battery uninterrupted power supply inverter to the computer and other equipment power supply. That is to say that in most of the time is by city electric equipment for power supply, so the backup uninterrupted power supply for city power network exists on the surge, peak, frequency offset can be eliminated. But the uninterrupted power supply backup power capacity is small, but it has the advantages of simple technology, low cost, cheap price, and it will be suitable in voltage stability occasions.

The Daily Work of Uninterrupted Power Supply
In their daily work, should be familiar with their use of cell type, it has the basic characteristics and performance. It can guide us to correctly use and maintenance, have very important sense, to extend the service life of the battery is very important. When charging, the best control in 10 ℃ temperature 30 ℃, right above 30 degrees C best to take measures to cool down the battery, to avoid overheating deformation; And the room temperature below 5 degrees Celsius, will cause the charge is insufficient, affect the service life of the battery.



The species of Uninterrupted Power Supply
The Uninterrupted Power Supply classification methods varied, according to the power size can be divided into large and medium-sized mistress power capacity; the output waveform can be divided into square wave, trapezoidal wave or sine wave; according to the input and output can be divided into single phase into single-phase, three-phase to single-phase or three-phase to three-phase; according to the work principle can also be divided into dynamic Uninterrupted Power Supply and static Uninterrupted Power Supply two categories. Dynamic ups backup power is dependent on inertial flywheel stored energy to maintain the load power supply continuity, the uninterruptible power supply with heavy, large noise, low efficiency, long switching time and other shortcomings, has been replaced by a static uninterruptable power supply. Static Uninterrupted Power Supply to batteries as the energy storage tool, city normal AC power is rectified into a DC electrical and electrical energy stored in the batteries, when the utility power is cut off by the inverter will be stored in the storage battery DC power into AC power to maintain power to the load. According to the different working modes, static Uninterrupted Power Supply can be divided into the backup Uninterrupted Power Supply, on-line Uninterrupted Power Supply, on line interactive Uninterrupted Power Supply and Delta transformation Uninterrupted Power Supply four kind of types.

www.everexceedcorp.com now offers a full range of lead acid batteries (network & motive power) and Nickel Cadmium batteries covering a wide range of applications from sophisticated telecommunications, uninterruptible power supplies, AGV to emergency lighting and security applications, and offers a full range of Monocrystalline, Polycrystalline Solar Modules combined with PWM/MPPT solar controllers, Grid-off/Grid-tied inverter covering a wide range of applications from sophisticated telecommunications, Power Electricity, Remote Area Electricity applications.

The article is come from:http://www.everexceedcorp.com/blog/index.php/what-is-uninterrupted-power-supply.htm
More about my article, you also can read:http://mainstransformer.appspot.com

Status of China's Rare Earth Industry

Reform of China Rare Earth Industry

China continuously pushes forward the reform of the rare earth industry, and promotes the formation of the rare earth market system investment subject pluralism, independent decision-making, and the price is determined by supply and demand. In recent years, China's rare earth industry investment gets rapid growth, the market is expanding, state-owned, private, foreign and other economic elements coexist, and rare earth market size is close to one hundred billion RMB. Market order is gradually improving, corporate mergers and reorganizations between progressive, "small, scattered, chaotic" situation initially changes in the rare earth industry. The level of science and technology is to further improve. After years of development, China has established a relatively complete system of R & D in the field of rare earth mining, smelting and separation, and the rare earth manufacturer has developed a number of international advanced level of technology, the mining process is unique and advanced separation technology for the development and utilization of rare earth resources laid a solid foundation. Rare earth new materials industries have been developing steadily, rare earth permanent magnet materials, luminescent materials, hydrogen storage materials, catalytic materials, and the new materials industry, provides support to transform and upgrade traditional industries and develop strategic emerging industries.



Rapid Development of China Rare Earths Industry

The rapid development of China's rare earth industry not only meets the needs of the domestic economic and social development, but also makes important contributions to the world's rare earth supply. Over the years, China has earnestly fulfilled the commitment to join the World Trade Organization, to comply with WTO rules, promote fair trade in rare earth. Currently, China, a country with 23% of rare earth resources bears more than 90% of the world market supply, and especially the cerium oxide manufacturer has made a great contribution. Chinese production of rare earth permanent magnet materials, luminescent materials, hydrogen storage materials, and polishing materials account for more than 70% of world production. The end products of China's rare earth materials, devices, and energy-saving lamps, micro motor, nickel-metal hydride batteries meet the needs of the world, especially the development of high-tech industry for many developed countries.



Problem of Chinese Rare Earth Mining Industry

During rapid development, China's rare earth industry also has many problems. As per the outstanding problems in the development of rare earth industry, the Chinese government further increases the supervision of rare earth industry. In May 2011, the State Council study and formulate and modify the improvement and enhancement of the relevant laws and regulations of the management of the rare earth industry. The Chinese government set up a rare inter-ministerial coordination mechanisms, research co-ordination of national rare earth development strategies, programs, plans and policies on major issues; establishment of rare earth office, coordinate the submission of rare earth mining, production, reserves, and export plans. In April 2012, the government approved the establishment of the China Rare Earth Industry Association.



www.rareearth-china.com is a leading company committed to the production, research and development, sales ceramic raw material for chemical industry, as well as chemical raw materials for glass-ceramic. If you are interested in our products, welcome to visit our page for more details!



The article is come from:http://www.rareearth-china.com/news/23.htm


More about my article, you also can read:http://industrialgoodsinfo.appspot.com

Household Leather Knowledge

Leather is a necessity of life of human decoration field. With the increase of the world population, and living standards rising, decorated leather consumption increases relatively.

Generally speaking there are several kinds of leather:

1.Genuine leather

It is made from processed natural rawhide. Genuine leather is often used for sofa and couch products.

Advantages: good air permeability, natural.

Disadvantages: it might smell bad because of the using of some deodorant, preservatives in manufacturing process.
Poor wear resistance and easy to fade, little change in surface texture. Color issues happen easily for large genuine leather goods. Need special care especially for its dermis pores. Easily affected by water, easily get mold.



2.Artificial leather

Artificial leather is a fabric or finish intended to substitute for leather in fields such as upholstery, clothing, and fabrics, and other uses where a leather-like finish is required but the actual material is cost-prohibitive, unsuitable, or unusable for ethical reasons.
Artificial leather is divided into the following three categories which can be supplied by Leatherette Manufacturer:
a.PU leather

Advantages: touch compliant, environmentally friendly biodegradable material.
Disadvantages: bad Waterproof performance, easily chapped by cold, poor wear resistance, surface easily hydrolyzed after contact with air and water, produce cracking phenomenon, not durable enough.

b. PU / PVC leather

Advantages: the lines are imported designing, can be composite production.

The surface of this leather can be antique, fashion, or even science and technology. Because there is no limit in the using, it has diverse and rich texture.It is easy to maintenance and has excellent color fastness and waterproof performance. Flameproof, wear-resistant, antibacterial and antifungal.
PU/PVC leather can be supplied by shoe leather supplier.
Disadvantages: not degradable, higher production costs



3. PVC leather

Advantages: durable, waterproof, good abrasion resistance. Lines are round with repression, cheap cost.

Disadvantages: very heavy plastic smell, not environmentally friendly, touch is not good, stiff. The color products need processing because of its poor color fastness. Lines are stiff and not natural enough because of its production crafts.



www.leathermanufacturer.net was established in 2000. Its predecessor named "The frist plastic group" was established 1983. The company is a professional synthetic leather manufacturer possessing two wet and two dry PU production lines and one set of new PVC production line as well as complete post-disposal equipment. Its mainly manufacture various middle-high grade PVC, semi PU, wet PU synthetic leather. Main products are furniture leather, shoes leather, handbag leather, garments leather and car seat cover leather.The quality of products is in line with International Inspection Standard.



The article is come from:http://industrialrawmaterials.webnode.cn/


More about my article, you also can read:http://industrialrawmaterials.webnode.cn/http://www.leathermanufacturer.net/News/42.htm

The State Quo of Industrial Nozzle Industry

Analysis of Nozzle Industry

From the entire market point of view, the domestic market of industrial nozzle is divided into the construction, expansion-way project market and the old transformation project market. From these two markets, the ordinary industrial nozzle products can basically meet the basic requirements, so the competition between enterprises is intense. With the market opening up, nozzle enterprises' needs of the market are deeper, which exacerbates the cost of product development and production of human and material resources, in addition, the production cycles are getting shorter, there are about 1300 industrial nozzle manufacturers in the domestic market in China, which can supply more than 3000 kinds of products, more than 20,000 specifications for urban public facilities nozzle, such as flat fan nozzle, and 80% of the sprinkler nozzle products can meet the demand of the domestic market, while the remaining 20% of the special requirements also need to import foreign products. With the introduction of China's 12th Five-Year Plan program, especially nozzle used in urban construction will be a large market, our the nozzle manufacturers need to play solid basic skills to produce the high-quality nozzle to meet the needs of our industrial nozzle and reduce the cost of economic development. Our country also needs to produce more durable high-temperature silicon carbide nozzles to meet the situation that our silicon carbide nozzle is highly dependent on imports.







Develop direction of China's industrial nozzle

China should develop new products for industrial nozzles, nozzles product development has to be developed around the focus of China's industrial development, so gathering strength, saving the expense of human and material resources, is to reduce the operating costs of enterprises. With the development of China's economic construction, China's focus economic construction is agriculture, environmental protection and infrastructure construction, and the nozzle market is mainly in electrical petrochemical, oil, and other urban construction industry in the future, and products to be developed are high quality industrial nozzles resisting to high temperature and high pressure, such as casting industry nozzle, large-caliber nozzle,spray gun nozzle to meet a huge market share of the industrial nozzle in China's chemical industry.



Development of China's industrial nozzle industry

Currently, shortage of low-voltage large-diameter nozzle cannot meet domestic demand, and new products are needed to be developed by the industrial nozzle enterprises. Enterprises should increase R & D efforts to increase capital investment and increase the development of new products, because the market competition is always won by quality and service. So enterprises have to establish their own brand, and the special products are the cornerstone for the survival of nozzle enterprise and make a positive contribution to China's industrial nozzle industry.



www.spray-nozzle.net

Spray nozzle is of high degree accuracy and intractable. On the basis of spray nozzle processing, Changyuan Co., Ltd. is developing precision finishing of hareware parts industry. Changyuan Co., Ltd. has twenty Japan-made CNC automatic lathes whose precision can reach 2 micro or below and several sets of five spindle lathes whose orifice precision can reach 0.10mm.



The article is come from:http://www.gazoviepliti.info/spray-nozzle/the-state-quo-of-industrial-nozzle-industry.htm


More about my article, you also can read:http://chemicalrawmaterials.weebly.com/

Rapid Prototyping in the Mechanical Disciplines

Rapid Prototyping provides research platform for teachers

Laser rapid prototyping integrates optical, mechanical and electronic and information technology and it is another revolution of the traditional manufacturing technology following the numerical control technology, furthermore,rapid prototyping mold will play a tremendous role in promoting the construction of mechanical disciplines of colleges and universities. Taking the laser rapid prototyping as the platform can be carried out the multifaceted research work, and provide teachers with the opportunity to expand cooperation with enterprises. And every cooperation can be seen as a research project, so can apply for research funding at the provincial Science and Technology Commission and the Provincial Board of Education. The research results can be identified by the provincial Science and Technology Commission, the provincial Board of Education identified newspaper awards in scientific research to improve school quality of research work. Take the Xi'an Jiaotong University as an example, in the recent 2 to 3 years, it pioneers the development of automotive body, the key water-saving irrigation technology devices, artificial bone, and medical rehabilitation engineering, digital human research direction, to secure 863 of the number of national scientific and technological research and the natural Science Foundation with this unique technology.



Rapid prototyping provides a research platform 

Laser Rapid Prototyping is the platform and source of scientific research and graduate studies are more attuned to actual engineering work, at the same time, there have been a set of rapid prototype model to support research and postgraduate research. Graduate students can be engaged in the analysis and CAD, CAE, 3D repurchase and reverse engineering, technology, materials and the development of new products such as the broad field of research, and enhance the quality of graduate education, expand the scale of graduate enrollment.



Rapid prototyping carries out undergraduate education

Laser rapid prototyping is an advanced manufacturing technology to enhance the level of undergraduate teaching and practice, support innovation-oriented education reform work, and plays a great role in promoting mechanical engineering undergraduate cognitive, practical product development process, the ability to develop the use of advanced product development, especially in the CAD / CAE / CAM / RE / RP and mold manufacturing technology. Laser rapid prototyping can quickly change students CAD design into physical parts, to support technical support college students Innovative Design Competition and Product Challenge Cup game. There is no doubt that laser rapid prototyping plays more and more important role in the modern world, and we should make full use of it to apply it in the various fields.



www.rapid-prototype.net

Shenzhen Towell Model Manufacture Co., Ltd. has been one of the professional rapid CNC prototyping manufacturers in China since the establishment in 2002. Ever since, we have adhered to the principle of "Integrity, Foresight, Solution and Efficiency" and kept balanced development on scale and profitability. In the past decades, we have enjoyed sustained growth in both import & export business.



The article is come from:http://www.rapid-prototype.net/news/15.htm


More about my article, you also can read:http://industrialrawmaterials.webnode.cn/

Notes for Air Cooled Screw Chiller Selection

Definition and classification of air cooled screw chiller

Air cooled screw chiller is named as screw chiller because its key components compressor uses screw type. According to different cooling methods, it can be divided into water-cooled screw chillers and air-cooled screw chillers two kinds. The screw chiller cooling capacity ranges from 100Kw / h to 860Kw / h, screw compressor power ranges from 38Kw-178Kw, which can be widely used in all walks of life whose refrigeration is particularly huge amount. Below we introduce you notes to select air cooled screw chiller:



Firstly, the screw chiller selection should be considered in accordance with the cooling load and prepare for what aspect. For refrigeration system in longer low-load operating conditions, it’s better to select multi-head screw compressor group, ease of conditioning and energy efficiency, that is the dual-head screw chillers or three head screw chillers we often say, which may change as the load, the chiller automatically determines to open the capacity of the compressor and ensure open compressor in top working condition, in order to effectively save energy.



Secondly, at the selection of screw chillers, take precedence to consider the unit with higher performance coefficient values. In accordance with previous statistics, the normal chiller running time at 100% load accounts for less than 1/4 of the run time throughout the year; in minutes running time, 100%, 75%, 50% and 25% load running time ratio is roughly 2.3%, 41.5%, 46.1%, 10.1%. Therefore,low temperature chiller model with relatively flat efficiency curve should be prior in the selection of the chiller. In design selection, you should consider the chiller load adjustment range, multi-head screw chiller part load performance is good, the screw chillers can be selected in accordance with the actual situation of the factory.



Thirdly, at the selection of screw chillers, you should be aware of the conditions of the nominal conditions. The actual cooling capacity of the chiller is related to the following points:

1. Chiller water temperature and return water temperature, which is the shell and tube evaporator water temperature

2. The chiller cooling circulating water inlet temperature, flow rate, and fouling factor, refers to the condenser water temperature

3. If you use air-cooled screw chillers, please note the use of ambient temperature, humidity environment, these factors directly affect the efficiency and service life of the chiller;

4. Air cooled screw chillers have special requirements in specific industries, chemical, pharmaceutical, aerospace, machinery, aviation, chemical fiber industry needs clear that the use of local and sales staff in advance, such as the chemical industry may need electrical explosion-proof shell and tube evaporator needs to be corrosion resistant.



www.chillermanufacturer.net is professionally engaged in manufacturing Industrial Application Water Chillers and Energy-Saving Equipments. If you are interested in our products, please feel free to contact us!



The article is come from:http://machine.china-fillingmachine.com/industrial-water-chiller/notes-for-air-cooled-screw-chiller-selection.htm


More about my article, you also can read:http://industrialrawmaterials.techmaza.in

China Rare Earth Industry Self-Help has Many Difficulties

Chinese rare earth market situation

Since August last year, the Chinese rare earth tends to decline in both exports and domestic sales, not only the prices fall, production and sales lower, many traditional industries use rare earth cannot afford the high prices make rare earth costs rise, corresponding atrophy or alternatively reduce rare earth dosage. In April of this year, the price of rare earth has risen slightly, but stop soon in May. Particularly the lanthanum cerium accounting for about 75% rare earth elements is more apparent. In the case of the European debt crisis and the too high rare-earth prices, the export quotas also failed to complete in the first half of this year. Currently, the price has dropped to close to the level of April 2011, and the market still did not improve.



Expand domestic demand is imperative for China's rare earth industry development

Wang Zhongshan, vice chairman of the Nanjing Research on Rare Earth, said that after all, the rare earth is a small industry in the national economy; it causes trouble and impact to a wide range of industries. Some industries that originally use rare earth do the additives, modificators or functional materials instead look for other alternatives, or simply do not use the rare earth. Export has also lost some market. If not timely adopt policy to response, it is inevitable for China rare earth development step into the vicious cycle, the Chinese rare earth manufacturer will again face trough. Wang Zhongshan thought that making efforts to expand domestic demand and fight for the international market is imperative for China's rare earth industry development.



Domestic demand is the driving force for China rare earth

Wang Zhongshan thought that domestic demand is the driving force for China rare earth from discovery, development to the scale of production, application, and foreign trade accounting for the world's first, while domestic demand was originated from the promotion application in the 1980s. The Chinese rare earth develops and grows in the planned economy and market economy coexists period. In the early 1990s, low-cost development, sell foreign exchange earner, the market was formed in such circumstances. Low price and value deviation of rare earth in the past have objective reasons. The promotion and application is struggle for the annual number of rare earth as indicators.



Recommendation for China rare earth industry development

Although China rare earth production and export rank Top 1 in the world, there remains the gap in rare earth technology and the application with the world advanced level, which is also insufficient in saving rare earth materials application, applications, application process, etc. The rare earth supplier should have a long-term vision, and know the truth that lose domestic demand will loses survival, and it is recommend that the state play the role of the repository, purchase and store rare earth ore and products at reasonable prices, activating rare earth enterprises to develop steadily. When expand domestic demand, the temper justice with mercy export policy should be implemented, to maintain the China rare earth’s leading position in the international market.

www.rareearth-china.com is committed to the production,research and development, sales ceramic raw materials and cerium oxides and other rare earthe materials for chemical industry, as well as chemical raw materials for glass-ceramic.



More about my article, you also can read:http://blog.oricon.co.jp/industrialrawmateria/

Characteristic Constructions in the Packaging Production

The development of green packaging products

With the continuous improvement of the socio-economic level, people's consumption level is also rising rapidly, and people's use on packaging bags is not limited to its traditional function, but extends to the aesthetic, environmental, and personality, and this is the trend of the modern packaging bags wholesale and it is the factors that plastic bag manufacturers should consider today, so the sales of the product will have a direct impact on consumers. Both production and printing must be in-depth understanding of consume's psychological needs in order to adapt to the trend of the realm of the 21st century. People began to pay attention to environmental issues, traditional products bear the brunt of environmental pollution caused enormous damage, and the plastic pollution has become one of the problems which to be solved urgently in today's society. In addition, every country began to develop and regulations to promote the plastic green production of plastic bags and manufacturers should follow the market development, focusing on the regulatory policies of the government, and take the use of green production concept and material craftsmanship. They should not only establish the social responsibility, but also for plastic bags manufacturers to establish a positive corporate image.



The enhancement in packaging bag performance

The main role of plastic bags is to protect the merchandise, which is the original intention of production. It is the largest application spaces, but also the fundamental use of plastic bags. For some perishable food, vacuum food bags should be used to guarantee the freshness of the food without being compromised. Therefore, we must first focus on the strong practicality of the aluminum bags food packaging and plastic bags.



Enhance the aesthetics of packaging design

Plastic bags will directly affect the consumer's desire to buy and bags represent the product grade and even the corporate image. Furthermore beautifully packaged started to spread, it needs are not satisfied with traditional practicality but gradually transformed to the point of view of appearance, personality, the trend of the new era, aesthetics matters should focus on the production of quality printed plastic bags.



Strengthening characteristics of bags

Consumption levels lead to the serious similar product homogeneity, if you want to stand out in a number of similar products to attract more consumers, plastic bags of the product plays a very important role. Quality plastic bags can highlight the product characteristics and advantages, leaving a good first impression to an increasingly demanding consumer and would lead to increase product sales.



www.chinaunipak.com

The operation principle of our company is "To survive with quality and developed with credit" and we insist the purpose of "Mutual cooperation, mutual benefit and common development". By now, we have customers all over the world, including Japan, Australia, America, England, Middle East, etc. We have made stable and good cooperation relationship with them due to the most competitive price and the best service.



The article is come from:http://www.handbagmanufacturer.com.cn/index.php/characteristic-constructions-in-the-packaging-production.htm


More about my article, you also can read:http://ameblo.jp/industrialgoods

Chinese Ceramic Pigment Prices Go Up

Overview of Ceramic Pigment

Ceramic pigment is a generic term of the pigment used on ceramics, including the glaze, underglaze and glazes and blank coloring pigment. In the ceramic production process, these pigments to be subjected to the calcination of the different temperatures, the requirements are also different as for different purposes pigment. The underglaze pigments should undergo high temperature (1300℃) calcination, requiring high stability, but the variety is less, the earliest use is the blue and white, underglaze red, and in recent years there has been red, yellow, blue, green, black, gray, brown and so on. Glaze pigments only need to withstand a temperature of 600 ~ 800℃, and thus a wide variety of rich colors. Further, as the glaze stain also has liquid paint, such as KS, etc., is a metal with organic synthesis vulcanization RESINOIDS, coupled with an organic solvent is made. The seventies is developed under a high temperature and fast firing pigments (glaze) color sintering temperature of 1100 to 1260℃, the color burn time is 35 to 120 minutes, so the tone will be rich.

The Ceramic Glaze Stain Price Volatility

It is precisely because of the influence of market expectations, from January to June this year, the ceramic pigments market prices strongly get higher. Praseodymium oxide soared to 210,000 RMB / ton from 160,000 RMB / ton, up 600 RMB / ton zinc oxide imported zirconium up to 100 U.S. dollars / ton, the domestic zirconia rose 1,000 RMB / ton. According to the analysis of industrial insiders, copper, cobalt, nickel and other nonferrous metals in boosting international market prices are higher, as well as the shipping price rises under the influence of ceramic color glaze industry veteran, the domestic pigment price increases ranging from 15% to 30%. In addition to the prices of non-ferrous metal raw materials, starch-based raw materials have risen. In addition, as an important raw material, color glaze frit price also increased, rising as much as 20%. Ceramic color glaze industry is relatively low technical threshold, enterprise product development capabilities are poor, and it is vulnerable to the strong of international market prices of raw materials.

Chinese Ceramic Raw Material Supply and Demand

For ceramic raw materials prices, from the point of view of production and sales volume, the market growth spurt in the second half of last year, the sector is generally optimistic market expectations; followed by the point of view from the current layout of the ceramic industry, ceramic production nationwide flowering pattern is formed, the northern ceramics production capacity gradually increased and the proportion of ceramic production patterns are changed; Third, countries are increasingly stringent restrictions on the exploitation of mineral resources, northern production of raw materials, because of the high proportion of iron, titanium and other ingredients, are not suitable for the production of high-quality polished tiles.



www.ceramicpigment.net is an integrated enterprise of R & D, production and management, mainly specialized in ceramic pigment, inclusion pigment, roller pigment, glaze stain, third firing pigment, ceramic printing glaze, frit, full-polished glaze, metal glaze color glaze etc. If you are interested in our products, welcome to visit our website for more details!



The article is come from:http://www.industrialmachinery4u.com/chinese-ceramic-pigment-prices-go-up.htm


More about my article, you also can read:http://blog.oricon.co.jp/industrialgoods

Mold Spring Applications and Prospect

Applications and specifications varieties of mold springs are increasing

The mold is the main process equipment for industrial production. Raise of the development and technology level of modern industrial products depends on the development level of the mold industry to a large extent. Since World War II, the automation speeds increase promoted the rapid development of foreign mold. In recent years, the domestic mold industry has developed rapidly. With the development of the mold industry, the applications and specifications varieties of mold spring are also increasing.



Current situation of spring industry in China

Spring industry in China is relatively backward in the industrial technology compared with other parts industry, the original basis is very poor, semi-mechanical process and produce spring. This is bound to affect the high-speed development of the entire spring industry, and also affects the development of spring new products - profiled strong spring. In order to do a good job in the development, study and mass production of mold spring, we should pay attention to solve the following issues:
1. In product manufacturing, the standard is the basis to ensure product quality. Now spring manufacturers respectively formulate technical standards and cross-section specifications, which impede the development of the profiled cut mold spring. We suggest that the competent departments make co-ordinated planning and arrangements, to develop the relevant national standards and product specifications as soon as possible, to ensure the quality of the mould spring, making it easy for user selection and use.
2. The material is the "food" of spring factory, which directly affects the spring production. The Ministry of Metallurgical Industry should develop, produce to make the mold springs to be widely used, to reduce the foreign exchange and move towards the world.
3. It is recommended that the Department of Electrical develop profiled spring coiling machine into the plan, issue the related spring processing equipment designated factory for implementation.
4. Professional spring manufacturers are small plant, workers are generally about 100, Chinese spring factory which has been built for 50 years have no more than 700 workers, so simply relying on the funds to engage in scientific research is limited, it is recommended that the national focus on fostering factories with conditions to develop, increase development funding to develop mold spring design theory, technology and other aspects of the case studies.
5. Profiled strong spring sales "situation" are excellent in the domestic market in recent years, the businesses being one step ahead in mold spring manufacturing can put forward their products into the international market with their own advantages.
www.wire-spring.net is a custom spring manufacturer located in FoShan City , Guangdong Province, China, providing in custom made spring products like flat spring, mould coil spring, and all sorts of wire spring: compression spring, torsion spring, extension spring, etc.
If you are interested in our products, please feel free to contact us!
The article is come from:http://equipment.china-foodmachine.com/mold-components/mold-spring-applications-and-prospect.htm
More about my article, you also can read:http://blog.oricon.co.jp/industrialgoods

Aluminum Foil in the Packaging Industry

Flexible packaging

Flexible packaging is a new type of packaging developed in recent years developed, it has the special effects of moisture-proof and preservation, and it is a kind of ideal packaging products in the modern packaging. It is the bag packaging container made of materials such as aluminum foil and plastic (such as: cooking bags,stand up pouch bags). In developed countries, the flexible packaging has become a major form in food and beverage packaging, especially in the developed countries of Europe, the United States, and Japan. Flexible packaging has been the mainstream of the global food packaging. The rise and rapid development of the flexible packaging in China makes the annual consumption of aluminum foil reach more than 20,000 tons, and it will have a larger market incremental space in the future.

Plastic composite packaging

In modern packaging, almost all opaque or the barrier composite products use aluminum foil for the barrier layer for packaging products, so the largest amount and the most widely used one is the plastic composite packaging. Aluminum-plastic composite cans material is made from aluminum foil and plastic film and kraft board and the packaging can be processed into various shapes, with the feature of non-toxic, tasteless, non-polluting and recyclable use, is the alternative of the extensive t tinplate, canning, cooking pot and other liquid packaging container in the market, particularly for frozen foods, simply food packaging and oil with considerable market usage. Aluminum-plastic composite hose and aluminum foil bagsare made of aluminum foil, plastic and resin, and then made by pipe equipment processing tubular semi-rigid packaging products, mainly used for paste, gel-like product packaging, such as toothpaste, creams, cosmetics, household chemicals a packaging container of the article. Aluminum-plastic composite hose has the advantage of isolated nature, difficult to break down, clean and beautiful.

Wine sealed packaging

Wine sealed packaging is a new type of packaging materials generated in recent years, with the requirements of the health standards of beer. Due to the features of good ductility, tensile properties and ease of printed of aluminum foil, it is widely used the bottle sealed packaging of beer, wine, and advanced soy sauce bottleneck.
Pet food packaging
In recent years, the pet food packaging products made of aluminum foil have obtained great development in the U.S. and European markets, while the market in our country is yet to be developed with great applications and consumer potential. In addition, with the development of new packaging technology, selectivity through aluminum foil packaging, antifreeze, aluminum foil packaging, anti-condensation aluminum foil packaging, aseptic packaging, Tetra Pak packaging will open a series of new market space. From the prospects for the development of China's packaging industry, with the change in consumption habits of people dining in recent years, the significant increase in beer consumption. And the wrapped aluminum foil also will obtain a rapid increase to the annual consumption of more than 10,000 tons, and there is still a large incremental space.
www.chinaunipak.com
We will consistently serve all customers with faithfulness and hospitality, and keep pursuing higher target, better quality and better service as we usually do. What's more, we are seeking for a common prosperous way based on mutual benefit. Warmly welcome you to contact us for business and give us your precious suggestions and comments; Sincerely looking forward to cooperate with you!

The article is come from:http://www.packagingmaterial4u.com/aluminum-foil-in-the-packaging-industry.htm
More about my article, you also can read:http://industrialrawmaterials.overblog.com

New Design Concept of Food Packaging Bags

Design requirements for food packaging bags are getting higher and higher

In our daily life, food has the closest relationship with human, food bags accompanying have entered tens of thousands of households. Today, whether walking into a store, a supermarket, or come into our family, beautifully designed, practical, convenient food packaging are everywhere. It is unthinkable that if there is no packaging, how food is be sent to each consumer. With increase of people's consumption level and scientific and technical level, and constantly developed new products, the design requirements for the food packing bags are also getting higher and higher.

Packaging design proposes higher and newer requirements

The rapid development of the food packaging bags only enrich people's lives, which also has gradually changed people's way of life. Food packaging can most embody the scientific level, living standards, design standards and cultural background of each era. The more developed countries, the packaging rate of goods is higher, it is a mirror to measure the level of economic development of a country. After the reform and opening up, China's food packaging industry rapidly develops, which has become an important industry of the national economy. At the same time, it is also a high-tech, high intelligence industry. With the development of the times, the people's demand for the quality of the food and food packaging bags is increasingly high, there are more and more styles and the technical is getting stronger, which proposes higher and newer requirements for people engaged in the packaging design, which is also the inevitable result of the development of the times.

Features of food packaging bags

As a special commodity in our daily lives, the nutrition and health of food is extremely important, but it is very perishable, so the aim of food bags is to ensure food sanitary quality and flavor as goods in storage and circulation process. Food packaging bags become part of the commodity as product additions, and are indivisible from commodities, which occupies a significant position in the modern market strategy. At the same time, as the main means of market competition, it can improve the added value of the commodity, it has become an important part of the marketing strategy, which plays the role of a silent salesman in the supermarket. The image of food bags directly reflects the brand and corporate image, and it plays a vital role in establishing brand name and good corporate image.

www.packingbags.net is the top one manufacturer in irregular shaped plastic bags and the second in aluminum foil bags in China. Our main products are header bags, header bags with self-adhesive tape, pillow shape bags, three sides sealing bags, ziplock bags, stand up bags with ziplock, side gusset bags with ziplock, shopping bags, handle bag, shrink label, woven bag, non-woven bag, sandy beach cushion, film printing, sublimation spent membrane and heat- transfer film products.

The article is come from:">http://www.packagingmaterial4u.com/new-design-concept-of-food-packaging-bags.htm
More about my article, you also can read:http://industrialgoods.techmaza.in