Some Useful Advice About Safely Store Rare Earth Magnets

Rare-earth magnets have existed since the 1970's and would be the most effective permanent magnets available. They are created using alloys of several elements, including rare earth elements coupled with a metal like nickel, iron or cobalt to produce a magnet that was more secure.
As these magnets are so incredibly powerful, rare-earth have a tendency to be dangerous. They can snap together quite difficult and unless they are safely stored, they may snap on your own fingers, causing some injuries and ripping skin.
Safe Storage of Rare Earth Magnets
Rare-earth magnets that are storing is a thing that anybody can do using a handful of simple substances that you likely have on hand.

Styrofoam is in shielding rare-earth magnets, invaluable. You'll be able to simply cut on a large block of Styrofoam and cut out the contours of the magnets. Work with a hot knife since Styrofoam can be difficult to cut, to achieve this readily. It may be better to lay out the magnets in the block and trace around them , then do the cutting with the magnets set aside. The less wriggle room there is, the less likely they're to fly out when another magnet or part of metal passes above.
From one half of your block, cut out two blocks that are 2" high and 1" long and wide. These may be pasted to the block that was contrary to make an interlocking storage unit that will securely carry the magnets without slipping.
An alternative is wood.
Duct tape is helpful in shielding the magnets and may also serve this function. Just roll the magnet. It will work as standard magnetically, but will be somewhat cushioned. A superb layer of duct tape will keep the magnets protected and should you leave a twist sticking up, it is possible to pull the magnet from other items.
Keeping rare-earth magnets is one thing that must be high priority to prevent physical injury to you personally or injury to the magnets. Keep in mind that whatever you use should block magnetic power and with adequate space the magnets cannot link with each other or any other material.
Adding a handle of a single kind or another can also be helpful, since it allows one to distinguish magnets simpler than if you have to pry them apart with your fingers.
As a Industrial Magnets manufacturer and exporter, Jiada has years' experience in manufacturing custom neodymium magnets, and is able to offer all kinds products. Jiada sincerely want to supply you with high quality xxx based on our professional technology. We sincerely welcome all friends all over the world to come for visit and cooperation.